www.microkey.com

Unverified Zones tab

This Help File Page was issued on 09/30/2017

This Help File Page was last Modified on 11/01/2022

  • Scroll to top of this topic Scroll to Top of Page

  • Print the current topic Print Topic

  • Send feedback on this topic by email Email Feedback

  • No expanding elements on this page Show/Hide Expanders

❑The Unverified Zones tab may be used to view and/or (re-)set the Test Status of one or more CSID Zones for an Account (Subscriber Panel CSID) that has been Placed On Test - usually as result of a request from a Technician working on that system at the Subscriber's premises, or by the Subscriber making that request themselves, and/or to identify which of those Zones are not expected (do not need) to transmit a Test Signal during the current Testing Process.

•This Unverified Zones feature only accesses those Signal ID and/or Physical Zone combinations defined within the CSID Zones Form with a Check in the Require Zone Test? box

✓When an Account's entire set of CSID Zones are placed on Test, all of the CSID Zones defined for that Account are then considered Unverified Zones, and so the Test Status of every Zone with a Check in the Require Zone Test? box is set to Waiting ("W").

✓The Unverified Zone tab in the Subscriber Panels section will show those CSID Zones that are currently Waiting to be Tested. for the currently selected CSID

 

➢Note: See Place an Account on Test for more detailed information about that procedure.

 

•The Unverified Zones tab may be used to (re-)set the Test Status of an Account (Subscriber Panel) that has been Placed On Test by a Technician working on that system at the Subscriber's premises.

✓The Unverified Zones tab is located on the Subscriber Panels section on the Monitoring Tab in the Edit View of the Subscribers Form

 

•Unverified Zone tab - Click the Unverified Zones tab to view the Test Status of the CSID Zones for the selected CSID that have been Placed on Test (and for which the system is currently Waiting for those Test Signals).

 

HelpFilesUnverifiedZonesTab

Subscriber Panels section - Unverified Zones tab

 

✓This Unverified Zones tab may be used to identify which of those Zones are not expected (do not need) to transmit a Test Signal during the current Testing Process, and to remove those from the list.

▪To do so, remove the Check mark from each record in the Unverified Zones tab which should have its Test Status set to Null (meaning that each should not be "Waiting" for a Test Signal).

▪This capability is provided so that the User may eliminate those CSID Zones which are not required to be Tested (i.e., they do not need to be placed into a Waiting - "W" - Test Status) and therefore make monitoring of those that do need to be Tested, easier.

✓Once changes are made, Click Save to record those changes or Click Undo it cancel them.