Navigation: Central Station Monitoring > MKMS CS - Central Station Monitoring Application > Shortcuts tab > Sub Info (F2) > Panel Information Icon: CSID Zone Overrides This Help File Page was issued on 09/30/2017

❑CSID Zone Overrides:

•The Operator may view the all CSID Zone Overrides defined for a Subscriber's system as follows:

✓Open a Sub Info Form (Press F2).

✓Using the Search option, locate the appropriate Subscriber CSID.

 

 

✓Click the CSID Zones option from the Panel Information Drop-Down Menu.

 

•The Overrides tab displays any exception for the currently selected CSID Zone -  based on the Day of the week and/or the Time - to the general processing information in the CSID Zones tab.

✓If Overrides have been defined for the current CSID Zone, the number of defined Overrides will be displayed in parenthesis (see the mouse pointer in the illustration below).

 

CSID Zones displaying Overrides tab

 

✓Overrides records list - A tabular listing of the Overrides defined for the current CSID Zone.

✓Select the specific Override record in the list to display that information.

▪Signal ID - The specific Signal Identifier for this event.

▪Physical Zone - The Zone Code, if one is transmitted with the Signal Identifier.

▪OCTAR Code - The type of signal (Open, Close, Test, Alarm, Restore).

▪Description - Double-Click (Memo) to view the Description of the CSID Zone.

✓Override data - Specific information for this Zone Override

▪Days - The days within the Week that this Override is active.

▪Start - The time of the day when this Override becomes active.

▪End - The time of the day when this Override ceases to be active.

▪Alarm Condition - The default description of the Alarm Condition.

▪Operator Action - The step(s) the Operator is to take when this Signal is received, if it is an Active Signal..

oResponse Needed? - Checked if some type of Operator Response is required.  

oDispatch - If this is an Active Signal, the type of response that is needed.

oVerify Signal? - Checked if this Signal is to be Verified by telephoning the premises in advance of any Dispatch, or other notification process.

oDisp Who - The person that should be specifically notified for this Event when Response Needed? is Checked and Other has been selected as the Dispatch option..

oAction Plan - If an Action Plan has been assigned to this Alarm Signal, that plan's name will be shown here.

▪For MKS Connect Service users only, and then only if a Signal ID has been entered above:

oNotify Subscriber on Alarm Dispatch - This is the Subscriber's notification preference.

oNotify Dealer on Alarm Dispatch - This is the Subscriber's the Dealer's notification preference.

▪Restoral Information - If the Signal has a corresponding Restoral Code, that information will appear here.

oSignal ID - The specific Signal Identifier that would indicate that the previously reported emergency condition, defined above, has been restored to its normal state.

oZone - The Zone Code, if one is transmitted with the Signal Identifier, that would indicate that the previously reported physical zone code, defined above, has been restored to its normal state.

oMinutes - The number of minutes the Alarm Signal, defined above, will be held by the software (this is done automatically) while awaiting for this Restoral Signal.

▪Cancel Information - If the Signal has a corresponding Cancel Code, that information will appear here.

oSignal ID - The specific Signal Identifier that would indicate that the previously reported emergency condition, defined above, has been canceled.

oZone - The Zone Code, if one is transmitted with the Signal Identifier, that would indicate that the previously reported physical zone code, defined above, has been canceled

oHold (Seconds) - The number of seconds the CSID Zone is placed on Hold while awaiting the Cancel Signal.

•Click the Close box to Exit this CSID Zones - Overrides Form.