Panels Page and PANELS Menu

This Help File Page was last Modified on 04/10/2021

<< Click to Display Table of Contents >>

Navigation:  Mobile Applications > MKSynergy >

Panels Page and PANELS Menu

This Help File Page was last Modified on 04/10/2021

PANEL menu

When the Panels page is displayed, many or all of these PANEL menu options may be included in the PANEL menu

Note: When the Panels option is selected from the CENTRAL-STATION menu, the Panels page is displayed; and the available PANEL menu options  are also listed (see the circled PANEL menu section in illustration immediately below)

 

HelpFilesMKSSynergyLocalCentralStationMenu-PanelsPage

MKSynergy - Remote (or Local) Central Station option displays the Panels page plus the CENTRAL-STATION and PANEL menus

 

Panels page:

1.Header section:

 

HelpFilesMKSSynergyRemoteCentralStationMenu-PanelsHeader

MKSynergy - Panels page - Header section

 

a.The top section of the Panels page - the Header section ("the Title bar") - will display the Customer Account Title with the number of Panels defined for this Customer Account shown in parentheses

b.Below the Title bar will be the full address, original Date they went on line, and their assigned Town Code (which represents the designated responding authorities for this Customer Account)

 

2.Panels section: This Panels section lists all of the Panels installed at this Customer Account

 

HelpFilesMKSSynergyRemoteCentralStationMenu-PanelsList

MKSynergy - Panels page - Panels list section

 

a.Options: These are the three option buttons on the Panels page

 

HelpFilesMKSSynergyRemoteCentralStationMenu-PanelsList

MKSynergy - Panels page - Panels list section

 

1)Add - Tap (Click) the Add button to identify new Panel which has been installed for this Customer Account  

 

When the Add option is chosen from a Panels page of a Customer Account assigned to a Remote Central Station: this a sample Create panel pop-up (and data requests) that may be displayed:

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-CreatePanel

MKSynergy - Remote Central Station - Panels page - sample Create Panel pop-up

 

« An asterisk next to a field name indicates that this is a mandatory field!

 

a)System # * - Enter the installed CSID (must be assigned by the Central Station)

b)Primary System # * - By default, this will be the Master CSID for this Account

c)Panel Type * - Tap (Click) this field to display a pop-up list of Control Panels from which you must choose the one being (that was) installed

d)Signal Format - Tap (Click) this field to display a pop-up list of Signal Formats from which you must choose the communicator format being used

e)Days, Hours, Minutes - Enter the expected time between tests

f)Communication Type - Tap (Click) this field to display a pop-up list of Communication Types from which you must choose the method being used

g)Timer Test - Tap (Click) this field to display a pop-up list of Signal Types from which you must choose the one being used

i.Any Signal. Auto Reschedule - Any signal received from this Panel (CSID) will constitute a valid test.  Once received, the system will reset the time for when the next Test Signal is expected by using the Days, Hours, Minutes entered above.

ii.Specific Signal. Auto Reschedule - A Specific Signal must be received {which may be defined in the Account Testing section - see below} from this Panel (CSID) to constitute a valid test.  Once received, the system will reset the time for when the next Test Signal is expected by using the Days, Hours, Minutes entered above.

h)Location - Enter the location at this premises where the Control Panel was (will be) installed

i)Fail Test Event - Tap (Click) this field to display a pop-up list of Signal Descriptions from which to choose the Failed To Test alarm condition Code's description should this occur

j)Information - Enter any additional note or comment as may be appropriate

k)Listen In Panel Type - Tap (Click) this field to display a pop-up list of Communication Formats from which you may choose the one being used

l)Alt Panel ID - Tap (Click) this field to display a pop-up list of Panels associated with this Customer Account and choose the appropriate one, when required

m)IP Address - Enter the installed system's IP address when needed.

n)Save - Tap (Click) this Save option to record your entry.

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-CreatePanelEntry

MKSynergy - Remote Central Station - Panels page - sample Create Panel pop-up with data

 

When the Add option is chosen from a Panels page of a Customer Account assigned to a Local or Remote Central Station using MKMS CS: this is the Create panel pop-up (and data requests) that will be displayed:

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-CreatePanel-2

MKSynergy - Local or Remote Central Station using MKMS CS - Panels page - Create Panel pop-up

 

« An asterisk next to a field name indicates that this is a mandatory field!

 

a)CSID # * - Enter the installed CSID (must be assigned by the Central Station)

b)Part  - Tap (Click) the down-arrow on the right of the Part field and select the installed Control Panel type being used

c)Primary CSID - Tap (Click) this check-box field to indicate this is the Primary CSID at this premises.

d)Phone List - SPA can automatically insert Caller ID Telephone Numbers from which Alarm Signals were transmitted for this Account,

i.Tap (Click) this field to manually enter (additional) Caller ID Telephone numbers

e)Master CSID - Tap (Click) the down-arrow on the right of the Master CSID field to select the Master CSID for this premises

f)Phone DCU - Tap (Click) this field to enter the first Telephone number used to transmit alarm signals from this Panel, if appropriate

g)Event CSID - Tap (Click) this field to enter the Event CSID when appropriate

i.(In a similar manner to the Alternate Call List CSID assignment (see below) which identifies another Account whose People To Call information may be used by this Account), another Subscriber's Events information may be attached to this Account

h)Phone DCU 2 - Tap (Click) this field to enter a second Telephone number used to transmit alarm signals from this Panel, when available

i)Keypad code - Tap (Click) this field and enter the master Key Pad Code for this Control Panel.

j)Alternate Call List - Tap (Click) this field to select  from the list of available Alternate Call List CSIDs whose People To Call information may then be used by this Account

k)Description - Tap (Click) this field to enter a brief description of the installed alarm system

l)Immix ID - Tap (Click) this field to enter an Immix Video ID when required

m)Communicator format - Tap (Click) the down-arrow on the right of the Communicator format field and select the installed Control Panel format being used .

n)Panel Connection - Tap (Click) the down-arrow on the right of the Panel Connection field and select the type on communication method being used

o)Update Area? - Tap (Click) this check-box field to have SPA update the Area information based on information in specific packet information received with a Signal.

p)Update Zone? - Tap (Click) this check-box field to have SPA update the CSID Zone information based on information in specific packet information received with a Signal.

q)Update User? - Tap (Click) this check-box field to have SPA update the User ID information based on information in specific packet information received with a Signal.

Note: Currently, this information is only required when a DMP Receiver is being used to receive the Signals from this Subscriber.

r)Save - Tap (Click) this Save option to record your entry.

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-CreatePanel-2WithData

MKSynergy - Local Central Station - Panels page - Create Panel pop-up with data

 

2)Refresh - Tap (Click) the Refresh button to re-load the currently selected Account's data.

3)HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-Zones-OnTestSliderTap (Click) this Set On Test button to place all listed Panels on test (you must enter the number of Hours this on test status should be activated

 

b.Actions: Each listed Panel (CSID) has these two Action Icons available:

 

HelpFilesMKSSynergyRemoteCentralStationMenu-PanelsList

MKSynergy - Panels page - Panels list section

 

1)HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-LookUpIconPanel Information - Tap (Click) this button to display the Panel Information page for the selected Panel (see #1. below)

2)HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-Zones-OnTestSliderOn Test slider - Tap (Click) this button to place this Panel on test (you must enter the number of Hours during which this on test status should be activate

 

PANEL menu

Outlined below are the various options which may be available on the PANELS Menu:

1.Panel Information option - displays detailed information for a specific Panel.  To open the appropriate Panels Information page:

a.From Panels page select the Look up Icon for the required Panel Information page [see 1) HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-LookUpIconimmediately above], or

 

HelpFilesMKSSynergyRemoteCentralStationMenu-PanelsList-PanelsPage

MKSynergy - Remote (or Local) Central Station option displays CENTRAL-STATION and PANEL menu - with MKMS CS formatted Panel Information chosen

 

b.From a Panel Information page displaying information for a different Panel for this Customer Account; Tap (Click) the current Panel Number button (see hand pointer in above image) to open the Select panel pop-up box (illustrated in 2.Account Testing option below) with a list of the Panel(s) for the selected Customer Account and allows the User to Choose the Panel to be displayed

 

HelpFilesMKSSynergyRemoteCentralStationMenu-PanelsList-STAGESPanelInformationPage

MKSynergy - Remote Central Station option displays CENTRAL-STATION and PANEL menu - with STAGES formatted Panel Information chosen

 

2.Account Testing option - displays Account Testing information for the User selected Panel (CSID).  Initially it displays Account Testing information for the numerically first Panel (which may or may not have an on test status currently in effect) of this Customer Account

a.Select panel pop-up - Tap (Click) the current Panel Number button (see hand pointer in above image), then Tap (Click) the desired Panel (CSID) from the Select panel pop-up

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-SelectPanelPopUp

MKSynergy - Select panel pop-up

 

b.Account Testing page - The Account Testing page for the selected Panel CSID will be displayed

i.Account Testing requirements for the selected Panel (CSID) - establishes what constitutes a valid Test Signal for this Account

ii.The Account Testing page list the Account Testing requirements which have already been defined

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTestingpage

MKSynergy - Remote (or Local) Central Station option - PANEL Menu - Account Testing page

 

iii.Add - Tap (Click) the Add button to create a new Account Testing Event.

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-AddOnTest

MKSynergy - Remote (or Local) Central Station option - PANEL Menu - Account Testing - Create test event pop-up

 

a)Options section - There are three Options on this Create test event pop-up  

1)Auto reset - Tap (Click) this box to have the Test Event reset automatically.

2)Generate alarms - If a Specific Signal is required to validate a Test, Tap (Click) this box and enter those Specific Signal fields at the bottom of the Options section (see Specific Signal below)

3)What constitutes a valid Test Signal ? - By default, this field will display test Only.

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-TypeOfTestEventRequired

Account Testing - Create test event pop-up - define what type of signal constitutes this Test Event

 

a)Tap (Click) the Test Event Type down-arrow to display a pop-up list of available Test Event types.

b)Tap (Click) to select the required type of Test Event

i.Any Signal - If any signal received at the Central Station constitutes a valid Test Signal for basic Account Testing supervision purposes, Click the Any Signal button.

ii.Closes & Tests - If any Close, and/or any defined Test signal received at the Central Station constitutes a valid test for Account Testing supervision purposes, Click the Closes & Tests button.

iii.Test Only -  If any defined Test signal received at the Central Station constitutes a valid test for Account Testing supervision purposes, Click the Test Only button. This is the default choice. 

iv.Specific Signal - If only one specifically defined Test signal received at the Central Station constitutes a valid test for Account Testing supervision purposes, Click the Specific Signal button and enter those sSpecific Signal fields at the bottom of the Options section:

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-SpecificSignalEntry

Create test event pop-up - Specific Signal option with Signal identifier & Physical zone field

 

Signal Identifier - Enter the specific Signal Identifier for this Test Signal.

Physical Zone - Enter the specific Physical Zone, if one is required.

 

iv.Refresh - Tap (Click) the Refresh button to re-load the currently selected Account Testing data.

 

c.Actions - There are three Action Icons plus an Add and Refresh button.

i.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-LookUpIconLook up status, options and Frequency information of the selected Account Testing item

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-StatusPage

MKSynergy - Remote (or Local) Central Station option - PANEL Menu - Account Testing - Status page

 

ii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-EditIcon Edit the selected Account Testing information

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-EditAccountTestingPage

MKSynergy - Remote (or Local) Central Station option - PANEL Menu - Account Testing - Edit Account Testing page

 

iii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-DeleteIconDelete the selected Account Testing information

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-EditAccountTestingPage-DeleteConfirmation

MKSynergy - Remote (or Local) Central Station option - PANEL Menu - Account Testing - Delete Account Testing confirmation

 

3.Areas - displays Areas information for the user selected Panel (CSID).  There is an an Add and Refresh button option plus three Action Icons:

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AreasPage

MKSynergy - Remote (or Local) Central Station option - PANEL Menu - Areas page

 

i.Add - Tap (Click) the Add button to create a new Area.

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AreasPage-CreateArea

Areas page - Create area pop-up

 

ii.Refresh - Tap (Click) the Refresh button to re-load the currently selected Areas data.

 

 

HelpFilesMKSSynergyCustomerAccountInformationPictureOptions

MKSynergy -  Areas Actions Icons

 

iii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-LookUpIconLook up the details of this selected Areas entry

iv.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-EditIcon Edit the details of this selected Areas entry

v.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-DeleteIconDelete this selected Areas entry

 

 

4.Call List - display the Contacts List which has a list of the Call List records for the selected Customer Account

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-ContactListPage

MKSynergy - Remote (or Local) Central Station option - PANEL Menu - Contact List page

 

If there is more than one Panel defined for this Account, a Select panel pop-up will be displayed from which the User will choose the required Panel.

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-ContactListPage-SelectPanel

PANEL Menu - Call List option - Select panel pop-up

 

i.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-LookUpIconLook up the Contact information entered for this selected Call List entry

ii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-EditIcon Edit the Contact information entered for this selected Call List entry

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-ContactListPage-EditContact

MKSynergy - Remote (or Local) Central Station option - PANEL Menu - Contact List - Edit Contact pop-up

 

iii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-DeleteIconDelete the Contact information entered for this selected Call List entry

 

iv.Add Contact - Tap (Click) the Add button to create a new Contact.

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-ContactListPage-CreateContact

MKSynergy - Remote (or Local) Central Station option - PANEL Menu - Contact List - Create Contact pop-up

 

v.Refresh - Tap (Click) the Refresh button to re-load the currently selected Call List

vi.Reorder Contacts - rearrange the order in which Contacts will be presented to an Operator when Processing an Alarm Signal

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-ContactListPage-ReorderContacts

 

vii.Select alternate call list - Tap (Click) the desired Panel CSID

 

HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-ContactListPage-AlternateCallList-SelectPanel

PANEL Menu - Select alternate Call List option - Select panel pop-up

 

5.Notes - displays Notes information for the user selected Panel CSID.

a.Select panel pop-up - Tap (Click) the desired Panel CSID

 

HelpFilesMKSSynergyLocalCentralStationMenu-Notes-SelectPanel

PANEL Menu - Notes option -Select panel pop-up

 

 

HelpFilesMKSSynergyLocalCentralStationMenu-NotesPage

PANEL Menu - Notes option - Notes page

 

b.The Notes page for the selected Panel (CSID) will be displayed (see above illustration)

 

HelpFilesMKSSynergyCustomerAccountInformationPictureOptions

MKSynergy -  Notes Actions Icons

 

c.Actions:

i.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-LookUpIconLook up the details of this selected Notes entry

ii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-EditIcon Edit the details of this selected Notes entry

1.The Date of this Note entry defaults to Today.  However, the user may re-Set the Date of this Note entry using the Calendar Icon (see mouse pointer in illustration below)

 

HelpFilesMKSSynergyLocalCentralStationMenu-NotesPage-EditNotePage

PANEL Menu - Notes option - Notes details page

 

a.Start date * - By default, the Start date will be set as Today and the Time will be set as Now.  

b.End date * - By default, the End date will be set as Today and the Time will be set as Now.  

c.Reset Date/Time - For either Date/Time entry, Tap (Click) the Calendar Icon to open the Calendar/Date pop-up and re-set the Date and/or Time as required.

 

HelpFilesMKSSynergyLocalCentralStationMenu-NotesPage-CreateNotePopup-Calendar-DateOption

PANEL Menu - Notes page - Create note - Calendar/ Date/Time pop-up

 

2.Tap (Click) the Note field and enter the required Note.

3.Tap (Click) the Save button

 

iii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-DeleteIconTap (Click) the Delete button to remove the selected Notes entry and confirm the deletion (which cannot be undone)

 

d.Add - Tap (Click) the Add button to create a new Note.

 

HelpFilesMKSSynergyLocalCentralStationMenu-NotesPage-CreateNotePopup

PANEL Menu - Notes option - Notes page - Create note pop-up

 

i.Start date * - By default, the Start date will be set as Today and the time will be set as Now.  

ii.End date * - By default, the End date will be set as Today and the time will be set as Now.  

iii.Reset Date/Time - For either Date/Time entry, Tap (Click) the Calendar Icon to open the Calendar/Date pop-up and re-set the Date and/or Time as required.

 

HelpFilesMKSSynergyLocalCentralStationMenu-NotesPage-CreateNotePopup-Calendar-DateOption

PANEL Menu - Notes page - Create note - Calendar/ Date/Time pop-up

 

iv.Note * - Tap (Click) the Note field and enter the required Note.

v.Save - Tap (Click) Save to record this Note entry.

 

e.Refresh - Tap (Click) the Refresh button to re-load the currently selected Notes data.

 

6.Open/Close Events - displays the Open/Close Events page for the user selected Panel CSID.

a.Select panel pop-up - Tap (Click) the desired Panel CSID  

b.The Open/Close Events for the selected Panel (CSID) will be displayed

 

HelpFilesMKSSynergyLocalCentralStationMenu-OpenCloseEventsPage

PANEL Menu - Open/Close Events page

 

i.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-LookUpIconLook up the details of this selected Open/Close Events entry (see iv. Add option below for an explanation of these fields)

 

HelpFilesMKSSynergyLocalCentralStationMenu-OpenCloseEventsPage-EditPage

PANEL Menu - Open/Close Events page - Look-up Open/Close Event page

 

ii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-EditIcon Edit the details of this selected Open/Close Events entry (see iv. Add option below for an explanation of these fields)

 

HelpFilesMKSSynergyLocalCentralStationMenu-OpenCloseEventsPage-EditOption

PANEL Menu - Open/Close Events page - Edit Open/Close Event page

 

iii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-DeleteIconDelete this selected Open/Close Events entry

 

c.Add - Tap (Click) the Add button to create a new Open/Close Event.

 

HelpFilesMKSSynergyLocalCentralStationMenu-OpenCloseEventsPage-AddOption

PANEL Menu - Open/Close Events page - Create open/close event pop-up

 

i.Schedule - Identify the scope and type of this Event:

1)Force Verify (Optional)  - Whenever this Event's signal is received, whether or not it is within the Event's Time Window, and the Operator is required to Verify the signal at the Premises, Tap (Click) the Check box.

2)Start date & time (Optional)  - Tap (Click) the Calendar Icon to open the Calendar/Date pop-up and set the Start Date and/or Time as required

3)End date & time (Optional)  - Tap (Click) the Calendar Icon to open the Calendar/Date pop-up and set the End Date and/or Time as required

a.Setting the Date/Time - For either Date/Time entry, Tap (Click) the Calendar Icon to open the Calendar/Date pop-up and re-set the Date and/or Time as required.

 

HelpFilesMKSSynergyLocalCentralStationMenu-OpenCloseEventsPage-Calendar

PANEL Menu - Open/Close Events page - Create open/close event  - Calendar pop-up

 

4)Physical Zone (Optional)  - Tap (Click) this field and enter a Physical Zone code if required

5)Signal Identifier (Optional)  - Tap (Click) this field and enter a Signal Identifier if required

6)Event Type - Tap (Click) the down-arrow on the right to display a list of Event Types and select the appropriate one

7)Frequency - Tap (Click) the down-arrow on the right to display a list of Frequencies and select the appropriate one

 

ii.Users - Sometimes, to be considered valid, Event signals must be received from specifically identified Users    

1)User 1... 8 - Tap (Click) each (appropriate) field and select the Name of a User from the pop-up list presented

2)Save - Tap (Click) Save to record this Open/Close Event entry

 

c.Refresh - Tap (Click) the Refresh button to re-load the currently selected Open/Close Events data.

 

7.Signal History - displays a pop-up box with a list of the Panels defined for the selected Customer Account and allows the User to Choose the Panel's Signal History that is to be displayed

a.Signal History sample for Local or Remote MKMS CS monitored Customer Accounts

 

HelpFilesMKSSynergyLocalCentralStationMenu-SignalHistoryWithData

PANEL Menu - MKMS CS Signal History page with Signal History data

 

Using the Signal History page:

 

i.Time for - Tap (Click) this field to display the pop-up with Central Station and Customer Time and choose whose time clock will determine the Signal History Search results

ii.From date & time - Tap (Click) the Calendar Icon to choose the starting date and time for this Signal History Search

iii.To date & time - Tap (Click) the Calendar Icon to choose the ending date and time for this Signal History Search

iv.Search - Tap (Click) the Search Icon to execute the Signal History Search

v.Signal History - The results of the Signal History Search will be displayed (as illustrated above)

 

b.Signal History sample for Remote STAGES monitored Customer Accounts  

 

HelpFilesMKSSynergyRemoteCentralStationMenu-STAGES-SignalHistoryWithData

PANEL Menu - STAGES Signal History page with Signal History data

 

8.Zones - displays a pop-up box with a list of the Zone(s) defined for the selected Customer Account and allows the User to Choose which one to display

a.Zones page sample for Local or Remote MKMS CS monitored Customer Accounts  

 

HelpFilesMKSSynergyLocalCentralStationMenu-ZonesPageWithData

PANEL Menu - Zones page with Zone List

 

Using the MKMS CS formatted Zones page Button options:

 

i.Add - Tap (Click) the Add button to create a new Zone.

 

HelpFilesMKSSynergyLocalCentralStationMenu-MKMSCSZonesPage-CreateZone

Zones - MKMS CS formatted - Create zone pop-up

 

CSID Zone:

Signal ID - Enter the specific Signal Identifier for this signal, keeping in mind the Communicator Format that was assigned to the Subscriber's CSID in Subscriber Panel(s).

Physical Zone - Enter the Zone Code, if one is transmitted along with the Signal Identifier.

Alarm Code - Use the Drop-Down Selection List provided to Choose the appropriate Alarm Condition.

OCTAR Code - Use the Drop-Down Selection List provided to Choose (the list is shown below) the type of signal or event you are defining.

Description - Enter a brief description of what this CSID Zone represents

 

Operator Actions:

Response Needed? - Check this box when some type of Operator Response is required.  

Dispatch - If this is an Active Signal, use the Drop-Down Selection List to Choose  the type of response that is needed.

Verify Signal? -  Check if this Signal is to be Verified by telephoning the premises in advance of any Dispatch, or other Notification process.

 

Restoral information: Enter the data requested below to identify the appropriate Restoral Information for this CSID Zone.

Response Needed? - You do not Check the Response Needed? box for this CSID Zone (which is the one reporting the problem).

oThis is because, by completing these Restoral Information fields illustrated below, it eliminates the need for an immediate response.  

oEither the required Restoral Signal will be received within the allowable time frame (thus completing the Signal automatically), or a "Failed To Restore" Alarm Signal will be generated automatically.

Signal ID - Enter the corresponding Signal ID representing the Restoral of the CSID Zone's Signal ID entered above

Zone - Optionally, enter the Physical Zone representing the Restoral of the CSID Zone's Physical Zone entered above.

Minutes - If this Alarm Condition is not to be reported to the Operator until after a specified number of minutes has passed (allowing the Subscriber's system to restore to its normal mode in a reasonable period of time), enter that number of minutes here.

 

ii.Refresh - Tap (Click) the Refresh button to re-load the currently selected Zones data

iii.Unverified - Tap (Click) the Unverified button to display only the Unverified Zones

 

Using the MKMS CS formatted Zones page Actions Icons:

 

HelpFilesMKSSynergyLocalCentralStationMenu-ZonesPageWithData-Actions

PANEL Menu - Action Icons on MKMS CS formatted Zones page showing Zone List

 

i.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-LookUpIconLook up the details of this selected Zone entry

ii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-EditIcon Edit the details of this selected Zone entry

iii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-Zones-OnTestSlider Tap (Click) this On Test slider button to place the selected Zone on test (you must enter the number of Hours this on test status should be activated

iv.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-DeleteIconDelete this selected Zone entry

 

b.Zones page sample for Remote MAS and STAGES monitored Customer Accounts  

 

HelpFilesMKSSynergyRemoteCentralStationMenu-MAS-ZonesPageWithData

PANEL Menu - MAS formatted Zones page with Zone

 

 

HelpFilesMKSSynergyRemoteCentralStationMenu-STAGES-ZonesPageWithData

PANEL Menu - STAGES formatted Zones page with Zones

 

Using the STAGES or MAS formatted Zones page Button options:

 

i.Add - Tap (Click) the Add button to create a new Zone.

 

HelpFilesMKSSynergyRemoteCentralStationMenu-ZonesPage-CreateZone

Zones - STAGES formatted - Create zone pop-up

 

 

HelpFilesMKSSynergyRemoteCentralStationMenu-MAS-ZonesPage-CreateZone

Zones - MAS formatted - Create zone pop-up

 

ii.Refresh - Tap (Click) the Refresh button to re-load the currently selected Zones data

iii.Set all panels on test - See Set on-test below

 

Using the Zones page Actions Icons:

 

i.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-EditIcon Edit the details of this selected Zone entry

 

HelpFilesMKSSynergyRemoteCentralStationMenu-STAGESZonesPage-EditZone

Zones - STAGES formatted - Edit zone pop-up

 

ii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-Zones-OnTestSlider Tap (Click) this On Test slider button to place the selected Zone on test.  You must enter the Date and Time Range that this on test status should be activated and Comment,Category & Type information

 

HelpFilesMKSSynergyRemoteCentralStationMenu-STAGESZonesPage-SetOnTest

Zones - STAGES formatted - Set on test pop-up

 

iii.HelpFilesMKSSynergyRemoteCentralStationMenu-Panels-AccountTesting-DeleteIconDelete this selected Zone entry

 

Back - Whenever available, Tap (Click) the HelpFilesMKSSynergy-MenuBackIcon Back Icon to return to the previously displayed page (or pop-up)

 

HelpFilesMKSSynergyMenu-BackIcon